2-2
C
HAPTER
2: I
NSTALLING
THE
3C359 NIC
5 Reduce any static electricity on your body.
Each NIC is packed in an antistatic container to protect it
during shipment. To avoid damaging any static-sensitive
components after removal from the container, be sure to
reduce any static electricity on your body.
One way to reduce static electricity is to touch an unpainted
part of the computer’s metal chassis. You can maintain
grounding by wearing an antistatic wrist strap attached to
the chassis.
6 Verify that your tools are nonconducting or insulated.
Your tools should include a flat-head screwdriver and a
Phillips-head screwdriver. To avoid permanent damage to
the NIC or other computer circuitry, use only insulated or
nonconducting tools.
Unpacking and Inspecting the 3C359 NIC
The contents of the 3C359 NIC package follow. If items
are missing, contact your authorized network supplier
immediately.
■
TokenLink Velocity XL PCI 3C359 NIC
■
TokenDisk
diskettes #1 and #2
■
TokenDisk
CD
■
TokenLink Velocity XL PCI Network Interface Card User
Guide
and
Quick Start Guide
1 Unpack the 3C359 NIC and remove it from its
antistatic container.
2 Lay the NIC on its antistatic container.
3 Inspect the NIC for visible signs of damage.
If you find damage, immediately notify your authorized
network supplier and the carrier that delivered the NIC.
4 If you have purchased the separate TriROM accessory,
install it in the 3C359 NIC’s boot ROM socket
according to instructions supplied with the TriROM.
Complete the Product Registration Card and return it to
3Com, or call 1-800-NET-3Com for immediate registration.
Book Page 2 Saturday, November 1, 1997 3:13 PM
