Installing a 3C359 NIC Driver for Windows Environments
4-5
Installing a Driver for Windows 95 Version 950b, OSR2
Follow these steps to install the driver for Windows 95
version 950b, OSR2. It is assumed that you are already
running Windows 95.
During installation, have the Windows 95 software
accessible on diskettes, CD, or hard drive in case the
installation utility requests files from the Windows 95
software library.
1 Install the 3C359 NIC and start the computer.
Windows 95 detects the new hardware.
PCI Token Ring
Controller
appears in the New Hardware Found dialog notice.
The Update Device Driver Wizard dialog box appears.
2 Click
Next
.
3 Click
Other Locations
.
The Select Other Location dialog box appears.
4 If you are using 3.5-inch diskettes, insert
TokenDisk
diskette #2 in the drive. If you are using the
TokenDisk
CD, insert it in the CD-ROM drive.
5 At the prompt, enter the appropriate path for the
drive containing your
TokenDisk
diskette or CD and
the driver you want to install.
For example, use the following path to install the NDIS 4
driver (recommended) from the
TokenDisk
diskette:
a:\w98nt40
Use the following path to install the NDIS 3 driver from the
TokenDisk
diskette:
a:\w95nt351
If you are using the
TokenDisk
CD, substitute the
appropriate drive in the path.
6 Verify that the Update Device Driver Wizard dialog
box lists
3Com TokenLink Velocity XL PCI Adapter
, and
click
Finish
.
Have the Windows 95 software accessible in case the
installation utility requests files from the Windows 95
software library. Insert the appropriate diskette or CD if
prompted to do so.
Book Page 5 Saturday, November 1, 1997 3:13 PM
