3Com Wireless 11g PCI Adapter
14
3.3.1
WEP: Setting the Network Key (Network Security)
This section gives instruction on how to correctly set up WEP security on your HP PC. If you
are currently running a WPA/WPA2 enabled device, skip to Section 3.3.2, WPA/WPA2:
Setting the Network Key (Network Security).
In order to set up your Network Key (WEP security feature) you will need to do the
following:
1.
Open the Wireless Network Connection Properties dialog box:
•
Right click on the Wireless Networks icon in the system tray.
•
Select
View Available Wireless Networks
from the Wireless Networks I
con menu.
The Wireless Network Connection dialog box appears.
•
Select
Change advanced settings
on the left side of the dialog box.
The Wireless Network Connection Properties dialog box appears.
•
Select the Wireless Networks tab as shown in figure 10 below.
Figure 10: Manually adding a Wireless Network
2.
Select
Add
under the Preferred networks selection box.
The Wireless Network Properties dialog box appears.
