Running Diagnostic Programs
3-5
Follow these steps to run the Echo test:
1 On both PCs:
a
Click the Windows
Start
menu.
b
Select
Programs
.
c
Select
3Com NIC Utilities
.
d
Click
3nicdiag.
e
Click the Diagnostics tab to display the Diagnostics
screen, shown in Figure 3-2.
2 On the responding PC:
a
Click
Respond
on the Diagnostics screen (Figure 3-2)
.
The Echo Test Responder screen is displayed, as shown
in Figure 3-3.
Figure 3-3
Echo Test Responder Screen
b
Click
Start
on the Echo Test Responder screen.
3 On the sending PC:
a
Click
Send
on the Diagnostics screen (Figure 3-2).
The Echo Test Sender screen appears on the sending PC,
as shown in Figure 3-4.
