To mount the holder screw the top into the base all
the way and then
UNSCREW HALF A TURN.
The
holder needs to be able to swivel slightly once it is
mounted. This allows for movement of the cord as
the machine foils.
Remove the plastic from the sticky pad on the back
and mount the holder so the slot in the holder is
pointing front to back on the machine, not side to
side.
TIP
–
The plastic is cut in half to make it
easier for you to remove
You can then push the USB plug through the slot in
the cord holder. You may need to wrap the cord label
around the cord to push it through.
Make sure there
is enough cord to allow the machine full movement
side to side.
