Pannoramic SCAN 150 1.15 User’s Guide
4 Software Description
Before starting the control software, you have to set the barcode settings here. By predefining the
barcode type, foreground color ( black or white – the color of the barcode), and other settings, you
enable the
Read Barcode
option when using the control software.
Note:
You can only scan the barcode type that you have previously set. If you
want to read several barcode types, you always have to set the current
barcode type before reading it.
Functions
•
To move the lowest magazine in the input stack to the loading position click
.
•
To move the magazine into the output stack, click
.
•
To move a selected slide from its magazine to the specimen holder either enter its position
number to the
Current slide
field and click
.
•
To return the slide to its magazine, click
.
•
To move all magazines to the output stack, click
.
To display an image of the barcode area, click
. You can redefine the barcode reading
area by dragging the edges of the green square.
To check whether the barcode reading settings are correct, display the barcode digits in the
Barcode
field by clicking
.
Note:
If you did not set the barcode type correctly, or there is no barcode in
the barcode area, the software will display the following error
message:
“Barcode detection unsuccessful! There might be no barcode
present.”
2012. March 13.
3DHISTECH Ltd.
33
(
132
)
