Pannoramic SCAN 150 1.15 User’s Guide
4 Software Description
These settings open any external application (.exe or .bat) as defined. For example, it might start the
Viewer software after finishing scanning, or stop the computer after scanning is finished.
You can define external application call settings for the following cases:
•
Scan Finished Call
•
Error Occurred Call
You can define the external software by entering the file path in the
Application
box, or by browsing
for it by clicking
.
If you define parameters in the
Parameters
box, it will pass them to the software that it starts. If no
parameter is defined, then the parameter will not be passed. The default parameters are the
following:
•
For Scan Finished Call:
"
<SLIDENAME>
"
– transfers the slide name
•
For Error Occurred Call:
"
<ERRORTEXT>
"
– transfers the error message
Run
defines the window mode that the external application will start in. The following window
modes can be set:
•
Normal window
•
Minimized
•
Maximized
You can test whether the Error Occurred Call settings work by clicking
. By moving the
mouse cursor over the
buttons, the software displays information about the setting you are
interested in.
4.3 Using Brightfield Manual Mode
You can use Brightfield Manual mode to set the scanning, preview, and image quality settings. You
can also set profile settings here, and start scanning in Brightfield Manual mode.
This Manual mode is perfect for digitizing slides that require unique settings, or single slides. You can
also define profiles here, which can be used in the Automatic mode.
For more information on profiles, see section
4.8
Using Profiles
.
For more information on Automatic mode, see section
4.4 Using Brightfield Automatic Mode
.
2012. March 13.
3DHISTECH Ltd.
46
(
132
)
