Pannoramic SCAN 150 1.15 User’s Guide
4 Software Description
Digital Gain
Note:
This is camera-dependent, when working with AxioCam MRm Rev 3.
the Index value ranges from 0 to 4, and with pco.edge from 0 to 6.
Enter the
Index
value by entering it in the box or by selecting the value with the arrow
buttons. If you raise the
Index
value, the exposition time is halved by every step, and the
image becomes noisier.
Fluorescent Compensation
Use saved compensation image. Compensation images can be created for those
filters, for which compensation images are created previously. To create
compensation image, see section
4.2.2
Image Compensation / Fluorescent
compensation.
To move between the filters, click
Previous Filter
or
Next Filter
.
Multilayer Settings
By clicking the
button the Multilayer Settings window is displayed. The
containing settings are the same as in Brightfield mode, but you can select
Extended focus
or
Z-stack
value for the specific channel.
Figure 48 – Multilayer Settings window
Set the focus level value under the
Number of focus levels
box, and the
Focus step size
(one step = 0.2 µm)
. Once you have set the correct values, tick the multilayer checkbox (EF
or ZS column) of the channel for which you want to apply these settings, or activate
Enable
Multilayer
function in the Filter Properties window.
2012. March 13.
3DHISTECH Ltd.
80
(
132
)
