Pannoramic SCAN 150 1.15 User’s Guide
4 Software Description
Fluorescent compensation
Use saved compensation image. Compensation images can be created for those
filters, for which compensation images are created previously. To create
compensation image, see section
4.2.2
Image compensation / Fluorescent
compensation
.
You can move between the filters by clicking
Previous Filter
or
Next Filter.
Multilayer Settings
By clicking the
the Multilayer Settings window is displayed. The
containing settings are the same as in Brightfield mode, but you can select extended focus
or Z-stack value for the specific channel.
Figure 56 – Filter properties window
Set the focus level value under the
Number of focus levels
box, and the
Focus step size
(one step = 0.2 μm)
.
Once you have set the correct values, tick the multilayer checkbox (EF or ZS column) of the
channel for which you want to apply these settings, or activate
Enable Multilayer
function
in the Filter Properties window.
For more information about Extended Focus, see section
4.3.5 Focus tab panel
.
2012. March 13.
3DHISTECH Ltd.
95
(
132
)
