5.2
Connecting Projectors in a Chain
Multiple projectors may be connected together in a ‘daisy chain’ by using the input and output
connectors on each projector.
The first projector is connected to the host PC using a 6-lead cable with RJ-12 connectors on
both ends. This cable connects to the PC through the supplied adapter (9-pin to RJ-12). The
other end plugs into the ‘Control Chain in’ port on the first projector.
From the first projector, another 6-lead cable connects between the ‘Control Chain out’ port on
the first projector to the ‘Control Chain in’ port on the second projector. This chain can be
extended up to the theoretical limit of 255 projectors in a single chain.
Figure 6: Connecting projectors in a ‘Daisy chain’.
In
In
In
Out
Out
11