28
3D Systems, Inc
.
NOTE: If the print file requires ABS material and PLA material
is installed, the printer will prompt the user to change the
cartridge(s) . Select
CHANGE CARTRIDGE
and refer to the section
titled
Replacing A Material Cartridge
.
NOTE: If the print file requires ABS material but PLA is installed,
the printer will prompt you to change the material cartridge . Select
CANCEL
and follow the instructions in the section titled
Replacing
A Material Cartridge
.
NOTE: If there is not enough material in the cartridge to complete
the print, the printer will prompt the user to replace the cartridge .
Select
CHANGE CARTRIDGE
and follow the instructions in the
section titled
Replacing A Material Cartridge
.
NOTE: If the creation file uses color(s) that are not installed,
selecting the
checkmark
will enable the printer to change the color
of the print to a color currently installed . You can also change
the cartridge by selecting
BACK
and following the
CHANGE
CARTRIDGE
instructions . To change the cartridge, refer to the
section titled
Replacing A Material Cartridge
.