57
3D Systems, Inc
.
SETTING UP AN AD HOC NETWORK
NOTE: An ad hoc wireless network can not be created in Windows® XP .
An ad hoc network is a temporary yet direct connection between a computer or device and the printer . It does not connect through
a router or base station and the data transfer rates are slower than the transfer rate of standard wireless networks . The computer or
device you wish to connect ad hoc to the printer must have an ad hoc adapter installed . An ad hoc network is deleted when the user
has disconnected from it or is out of range of other devices on the network unless it has been made a permanent network .
1 . Select
SETUP
from the home screen .
2 . Using either the left or right the navigation arrows, navigate to the
Network
screen .
3 . Select
WIFI
.
4 . Select
ADHOC
from the Select WIFI Connection Type screen .
5 . Select the
ON/OFF
bar to turn on the ad hoc network connection .