71
3D Systems, Inc
.
Offset Jets Calibration Procedure
The following procedure demonstrates calibrating print jets 1 and 2 on the X-axis . Calibrating the Y-axis is the same procedure . The
illustration below will be used for demonstration purposes . Be sure to refer to the actual scale printed by your printer and adjust the
settings accordingly .
1 . Browse to
www .Cubify .com
and select the Cubes + dropdown menu .
2 . Select
CubePro
.
3 . Select
Test Print Files
.
NOTE: The file will begin to download.
4 .
Extract the file and save it to a mass storage device.