76
3D Systems, Inc
.
MOVING THE PRINT JETS
The Print Plate Calibration menu provides a way to manually move the print jets and the print pad . The MOVE JETS utility can be
useful to test the X, Y and Z motors to ensure they are working properly .
1 . To move the print jets or the print pad, select
MOVE JETS
.
2 . Select the
checkmark
to continue .
NOTE: The
X: up arrow
moves the print jets to the right and the
X:
down arrow
moves the print jets to the left .
NOTE: The
Y: up arrow
moves the print jets to the back of the printer
and the
Y: down arrow
moves the print jets to the front of the printer .
NOTE: The
Z: up arrow
raises the print pad and the
Z: down arrow
lowers the print pad .
3 . Move the print jets or print pad in the desired direction and select the
checkmark
when finished.