OFFSET
Set the relative distance between each print tip .
Do not use the offset menu unless you have been advised to do so by Cubify support, changing this
may affect the quality of multi-material prints .
12
CUBEX MAIN MENU OVERVIEW
TOUCHSCREEN
Tap on the touchscreen to navigate to the main menus using the arrows on the bottom
corners of the touchscreen . To return to the touch screen, pressing the control button .
!
View the .cubex files that are saved on your memory stick and select a .cubex file to print.
INFO
Provides Material Cartridge status and printing status during the printing process .
PJ-MAP
Allows you to re-map your print jets .
PJ-CON
Allows you to manually jet your print jets, giving you control of temperature and RPM .
MOVE
Manually moves your print jet carriage in the X, Y and Z directions .
HOME
Sends the print jet carriage to its home position located in the back left corner of the printer .
LEVEL
Level your print pad in relation to the print tips .
Z-GAP
Set the distance between the print pad and print tips during the first layer of printing.
UPDATE
Used to update CubeX firmware.
INFO
MOVE
HOME
LEVEL
Z GAP
Z
OFFSET
UPDATE
PJ-MAP
PJ-CON