3D Systems, Inc.
99
p/n: 15-D100, rev. D
19. On the exterior of the filter, use a permanent marker to
write the date and all materials that are contained in the
filter.
20. Use a nr 5 Allen wrench to disconnect the grounding wire
between the filter and the filter cart.
Caution: The used filter may weigh as much as
100 Kg (220 lbs.).
21. Use the appropriate lifting equipment, adjusted to the
weight of the filter vessel, to lift the old filter from the cart.
• The filter vessel is equipped with a lifting eye.
• There are no fasteners securing the filter to the filter
cart.
22. Place the filter in the designated hazardous waste location
in your facility. Make certain the filter is protected from
mechanical damage and is not exposed to extreme
temperatures, direct sunlight or moisture.