3D Systems, Inc.
21
p/n: 15-D100, rev. D
3
DMP FLEX 350 AT A GLANCE
3.1 DMP Flex 350 Hardware Configurations
In the table below the different hardware configuration possibilities are listed per available material (LaserForm (A)) for the DMP
Flex 350 .
SYSTEM
MATERIALS
CONFIGURATION
INVENTORY ITEMS
GAS TYPE
DMP Flex 350
Titanium
•
Ti Gr. 1
•
Ti Gr. 5
•
Ti Gr. 23
DMP Flex 350 printer type A
DMP Flex 350 printer
Argon
DMP Flex 350 configuration A
Argon
Sieving station (optional)
Seiving mesh 60 µm
Argon
DMP Flex 350
Steel, Inconel,
CoCr
•
316L
•
17-4PH
•
Maraging Steel
•
Ni625
•
Ni718
•
CoCr F75
DMP Flex 350 printer type B
DMP Flex 350 printer
Argon
DMP Flex 350 configuration B
Argon
Sieving station (optional)
Sieving mesh 60 µm
Argon
DMP Flex 350
Aluminum
•
AlSi7Mg0.6
•
AlSi10Mg
DMP Flex 350 printer type B
DMP Flex 350 printer
Argon
DMP Flex 350 configuration B
Argon
Sieving station (optional)
Sieving mesh 80 µm
Argon
For a more detailed overview of the specific hardware configurations and gas type combinations, please refer to the
DMP
Safety Guide (p/n: 80-D0712)
.