3D Systems, Inc.
25
p/n: 15-D100, rev. D
15
16
14
13
Collimator
: Connection point of the laser optical fibre to the collimator in the DMP Flex 350 system.
Vacuum pump
: before starting a print job, the atmosphere inside the chamber needs to be oxygen free. The vacuum
pump removes all air from the process chamber creating a vacuum in the process chamber. This allows the process
chamber to be filled with argon gas to create inert atmosphere with oxygen levels lower than 100 parts per million (ppm).
Blower
: the blower continuously circulates the argon through the process chamber to extract all fumes and carry them
to the process filter.
Process filter
: all fumes and debris extracted from the process chamber are filtered out by the filter before the argon
atmosphere is reintroduced into the process chamber.
13
14
15
16