3D Systems, Inc.
p/n 15-D100, rev D
iii
5.7.2 Change Powder in a Single Printer Module
5.8.3 Restart after Emergency Off
6.2.1 Clean Machine Interior and Printer Module
6.3.2 Check Emergency Off Buttons
6.3.3 Check Chiller Temperature and Water Level
6.3.6 Automatic Laser Power Calibration
6.4.4 Check Oil Level Vacuum Pump
6.6 Every 6 Months / 2000 Hours
6.6.1 Clean Overpressure Valve