3D Systems, Inc.
40
p/n: 15-D100, rev. D
4.4.9 Configure Automatic Job File Backup
Note: this paragraph is only applicable if you have purchased and installed this option.
In order to have this function working correctly, always place the job files in a subfolder of the C:\Data\Jobs folder on your
machine. For example:
• C:\Data\Jobs\Job 01
• C:\Data\Jobs\Job 02
• C:\Data\Jobs\J20151201
• C:\Data\Jobs\Test job for customer X
Caution: Never place a job file directly under the C:\Data\Jobs folder or in another folder on the computer.
When a job completes, you can have the machine
automatically move your job file to a storage location (e.g. on
the network). After 48 hours, the job is automatically deleted
from the machine workstation, keeping it clean.
To enable this option (perform on each machine):
1. Start DMP Control.
2. Select
Admin
>
Configurations
>
Machine configuration
.
3. In the field
optJobFileAutoBackupPath
, set the path to
the (network) storage folder. Preferably use an IP based
address. Examples:
• X:\Backups\Jobs
• \\10.2.100.3\BuildFiles
• \\PC1234\Job backup)
4. The machine will automatically create a subfolder based
on its serial number, e.g. …\LM 25\
5. The job folders will be placed in this directory.
6. Click
Save
and restart DMP Control and DMP Deposition.
7. You can test access to the job storage folder (after software
restart) via: DMP Control > menu Admin > Open job storage
network folder.