3D Systems, Inc.
43
p/n: 15-D100, rev. D
4.4.11 E-mail Notifications
If the user wishes to be notified by e-mail of job completion or failure, the specific e-mail recipients can be added to the job
property NotifyUsers. Multiple addresses can be entered but must be separated by the character “
;
”.
1. To configure the e-mail server and recipients, you need to set up the configuration. Ensure your computer can connect to
the DMP Server and the internet.
2. Start DMP Control > Admin > Configurations > E-mail notifications.
3. For the “
From address
” (in the e-mail addresses field), you could use
DMP3000.%@mycompany.com
. The % character will
be replaced automatically by the machine serial number when the machine sends mail.
4. Use the
Send test e-mail
button to test your configuration
5. Click
Save configuration
to permanently save it on the DMP Server, making it available for all machines in your facility.
6. Make sure you add the sender addresses to your safe senders list in your e-mail program and check the SPAM folder in the
beginning.
E-mail recipients can only be added if the mailing configuration has been set.