3D Systems, Inc.
77
p/n: 15-D100, rev. D
c. Now slide the module on the cart and start turning the
wheel counter-clockwise until the module is fixed on
the cart.
d. Roll the module cart to the side.
10. Vacuum the process chamber with a wet-separator vacuum
cleaner.
11. Clean the complete inside of the process chamber using
paper towels with isopropyl alcohol.
12. In DMP Deposition, click
Material
>
Unload material
to open
the
Unload material from printer
pop-up window. Check
all boxes that have been completed and click
Confirm
empty
. The systems is now empty and ready to receive new
powder/batch/material.
Caution: This action needs to be performed before
a new batch or new material can be loaded