Figure 4
®
Standalone Quick Start Guide
Please see the Figure 4 Standalone User Guide, found on support.3dsystems.com/figure4standalone, for safety information and comprehensive operating instructions.
Save all foam and packing material for future use. Shipping without the original packing material may cause damage to the printer.
Other Useful Documents
Please visit
support.3dsystems.com/figure4standalone
and visit these helpful links:
Full Product Documentation
- Click this link
to see the User Guide, Customer Information
Bulletins, copies of guides in the printer box, and
software downloads.
Best Practices
- Click this link to view quick ref
-
erences, 3D Sprint tutorials, and post-processing
charts.
11. Register Your Printer
13. Activate Warranty
14. Check for Printer Updates
3
©2020 3D Systems, Inc. All rights reserved. P/N 46-0032 Rev. C
8. Install 3D Sprint
Ensure your computer can
run 3D Sprint - See
User
Guide
for specs.
9. Add Printer
1. Open
3D Sprint
. Click the
Printer
icon if Printer window is not already open.
2. Click
Find Printer
button to find printer on your network. If this fails, enter
the printer’s IP address and press
Enter
. The IP address can be found on the
printer’s touch screen on the
Settings
tab (above, right).
3.
Click the
Figure 4 Standalone
icon that the software just found.
4. Click
Next
.
1
2
3
4
Printer’s IP address will need to be an exception on your network’s
firewall, if applicable. Both the printer and the 3D Sprint PC must be
on the same network and connected to the internet.
2
1
1. On a PC, go to
support.3dsystems.
com/figure4standalone
.
Click
In-
stall Software
link.
2. Click
3D Sprint Download Page
.
Follow instructions to install
Sprint.
1.
To register your Figure 4 Stand
-
alone Printer, go to
support.3dsys-
tems.com/figure4standalone
.
2. Click
LOGIN
in the upper-right
corner.
3.
If you already have an account,
log in and skip to Section 13. If you
must create an account, proceed
to Section 12.
1. On
support.3dsystems.com/
figure4standalone
, click
Warranty
Registration
.
2.
Enter your printer’s serial number
and click
CONFIRM
. The SN is on
the back label of your printer.
1. In 3D Sprint, go to
Printer Tools >
Check for Updates
. If updates are
available, download/install them.
2.
In the future, 3D Sprint will check
for updates each time you open
the software.
1.
Below the login section, click
Not a member? Register here
.
2.
Fill out all fields. The printer serial number is on the back label. Click
Sign Up
.
3.
You will receive an email confirmation with a link to set your password. Follow the
link, enter your preferred password, and then click
Change Password
. This will
log you into the Support website.
10. Set Up 3D Sprint for Figure 4 Standalone
1.
Click the icon of the Material that you
plan to use. Click
Next
.
2.
Click the icon of the Shade you plan
to use. There may only be one. Click
Next
.
3.
Click the icon of the Print Mode
you wish to use. Click
Next
.
4.
Click the
Build Style
you wish to
use. Click
Set
.
1
2
It is vital that you register your
printer to activate your Service
warranty.
4
12. Sign Up for Infocenter
3
1
2
1
2
Materials
- Click this link, and click under
Figure
4
, to view the Standalone materials’ Safety Data
Sheets (SDS).
3D Sprint Online Help
- While in 3D Sprint,
launch online help by pressing
F1
, or by clicking
the
Help
icon.
