11
3D Systems, Inc.
Health Hazards / Irritant
•
Uncured VisiJet
®
C4 Spectrum binder is a sensitizer. Skin or eye irritation could occur when exposed to the chemical composition
of the material.
•
Any chemical may exert harmful effects if it contacts or enters the body. The binder is a sensitizer and irritant.
•
Skin Sensitization
•
Uncured material is a sensitizer, and can cause allergic reactions if it comes into contact with skin without protective gloves and pro
-
tective sleeves. Refer to personal protection equipment for more information. To avoid sensitization, do not allow uncured material to
contact skin. Consult the MSDS for specific information about the sensitization potential.
INHALATION
•
Under normal operation, inhalation of materials is not an expected route of entry. Wear a particulate dusk mask if concerned about
inhalation.
•
Ingestion
•
Uncured VisiJet
®
C4 Spectrum Binder is toxic if ingested.
•
Uncured material is toxic if ingested. Uncured material must not be present where food and drink are stored, prepared, or consumed
and not ingested. After handling materials, wash hands with soap and water before consuming or preparing food.
HANDLING FINISHED PARTS
•
Finished (cured) parts can be handled or disposed of the same as standard household plastic products. VisiJet
®
parts are not recy
-
clable. VisiJet
®
materials are not intended for and cannot be used for medical implantation, or food or drink handling applications.
•
Uncured parts must be handled with gloves and eye protection.
HYGIENIC PRACTICES
•
Appropriate hygienic practices should be followed, including washing with soap and water before meals, breaks, smoking, applying
cosmetics, using toilet facilities, and after work.
•
Employees should be alerted to the need to clean and rinse off any contacted surface promptly in order to prevent further contamina
-
tion. Ensure a convenient washroom location is provided with access to soap, water, and disposable paper towels.
IRRITANT