40
3D Systems, Inc.
4. The vacuum will stop automatically if the Feeder becomes full, or you
can push the Control Knob once to shut off the vacuum. If the Feeder
does become full, the LCD displays message at right. Only continue
running the vacuum if there is very little Core remaining to be cleaned
up.
NOTE
- When the feeder is full, it has enough Core to complete a build that uses the entire vertical capacity of the Build Bed. Adding
further core provides no benefit, and risks overfilling the feeder. Do not continue running the vacuum after the FEEDER IS FULL message
appears. If you continue to vacuum Core into the feeder, the LCD will display FEEDER LIMIT and the vacuum will be disabled.
FEEDER IS FULL
AUTO SHUTOFF IN 10 SEC
KEEP VACCUM ON
5. When finished, return the hose to its holder.
[NOTE: In the event of a powder spill, sweep the powder up and dispose of in a waste recep
-
tacle. Use only a non-ignition vacuum to vacuum spilled powder.]