8
3D Systems, Inc.
IMPORTANT SAFETY INFORMATION
SAFETY SYMBOLS AND DEFINITIONS
SAFETY GUIDELINES
Before using the printer, your company should have a safety program in place. The safety program should:
8
Electrical Shock Hazard:
High voltage electricity is accessible in the vicinity of this sign or behind the access panel.
High voltage can cause severe burns or death. Access panels are for service only and should be opened only by
certified service personnel or trained maintenance personnel.
Hot Surface Hazard:
A hot surface is accessible in the vicinity of this sign or behind the access panel. Avoid contact.
Hot surfaces can cause severe burns. Access panels are for servicing only and should be opened only by certified
service personnel or trained maintenance personnel.
Caution:
Indicates something may happen that could cause loss of data, damage to equipment, or personal injury.
Wear gloves
for any interaction with consumables.
Wear sleeves
whenever handling powder.
PACKAGING
7
NOTE:
Do not damage or discard any packaging materials or carton(s). If the printer needs to be returned to the manufacturer, it should
be shipped in its original packaging. If other packaging is used, the customer will be responsible for any shipping damages that may occur
Only Certified/Qualified Service Personnel can install the 3D printer.
•
Label and point out hazardous equipment, materials, and procedures.
•
Explain what to do in case of an emergency.
•
Provide information about hazards of equipment and materials in the form of Material Safety Data Sheets
(MSDSs). The MSDSs are provided with all materials supplied by 3D Systems. The Visijet C4 Spectrum
MSDS is also available on 3DSYSTEMS.COM
Wear eye protection
for any interaction with consumables.
[NOTE: Wear respiratory protection if you decide to sand any parts.]