3D Systems, Inc.
2
p/n 76-D020 Rev. A
The ProX® SLS 6100, the new cutting-edge Selective Laser Sintering (SLS)
production 3D printer from 3D Systems, takes SLS toughness, part quality and
manufacturing economics to the next level . Designed for smooth integration with
your manufacturing workflow, the ProX® SLS 6100 produces parts for a variety of
end-use and functional prototyping applications in aerospace, medical, industrial
design and more . Use the ProX® SLS 6100 and DuraForm
®
plastic materials to
produce parts with superior mechanical properties, resolution, surface finish and
edge definition compared to other processes.
Ensure repeatable, consistent, tool-free manufacturing and produce durable
functional parts faster with this mid-size production 3D printer . Additionally,
the ProX® SLS 6100 is equipped with mature production automation, mobile
production control and material recycling functions, so it pays you back faster .
ProX SLS 6100 AT A GLANCE
F
B
A
D
E
C
Stacklight:
Indicates the state of the
system .
Print Chamber Area:
There are two doors
in front of the Print Chamber—the outer
locking door, and the inner print chamber
door . The parts are printed inside the Print
Chamber .
E-Stop:
The Emergency Stop button is a
safety mechanism used to shut off the
machine in an emergency situation in which
it cannot be shut down in the usual
manner .
User Interface (UI):
The user controls the
system using a monitor, keyboard and
pointing device .
LED Interface Lights and Controls:
There
are three LED lights which give the user
visual feedback regarding the system . The
two buttons allow the user to control the
chamber lights and enable the system .
There is one standard USB port beneath
them .
User and Service Access Panels:
There are
two types of panels on the sides and back
of the machine—user access and service
access . The user access panels are hinged
doors . The service access panels are lift-off
panels .
A
B
C
D
E
F
2
INTRODUCTION TO THE PROX® SLS 6100