18
3dscentral.3dsystems.com
7. Post-Processing With Z-Bond
This section describes post-processing a part using Z-Bond™
infiltrant. The infiltrant soaks into the newly-printed part and
bonds the printed powder together. This both strengthens the
part and creates more vibrant colors.
Z-Bond is available in larger bottles
for use in the
dipping
method. For
parts with delicate features, smaller
bottles of Z-Bond are available for
drizzling
onto a part.
Please visit our the Materials section
of our Web site at
3dscentral.3dsystems.com
for
complete information regarding post-
processing materials, techniques,
Best Practices, and material storage
guidelines. While you’re there, visit
our 3DS Shop online store for all your 3D printing supplies.
7.1 Preparation
We recommend using the Post-Processing Unit to infiltrate your
part. Before you begin infiltrating your part, make sure the part
is completely free of powder. See “Fine Powder Removal” on
page 11. Follow these preparation guidelines:
•
Ensure the part is completely dry before applying Z-
Bond.
•
Wear a lab coat or smock, safety glasses, and a pair of
high quality gloves (supplied with the Z-Bond Dipping
Kit) or 2 pairs of lightweight disposable gloves (supplied
with the Starter Kit).
•
Place a piece of wax paper over the metal Post-Process-
ing Tray to keep it clean.
•
Use a dipping container large enough to fully submerge
your part.
•
Have paper towels ready for absorbing excess fluid.
In addition, if you are not using the Post-Processing Unit, we rec-
ommend the following:
•
Work in a well-ventilated area.
•
Place a piece of cardboard down in your work area and
place a piece of wax paper over the cardboard for the
part to dry on.
3D Systems also offers a
Z-Bond Dipping Kit
, which contains
all the supplies needed for post-processing. The Kit provides a
convenient and cost-effective way to get everything you need.
Please visit our Web site at
3dscentral.3dsystems.com
for
more information or to purchase your supplies through our 3DS
Shop online store.
7.2 Using the Post-Processing Unit
The Post-Processing Unit provides a convenient way to infiltrate
parts without having to move the part to a separate work area.
