Locate the magnetic latches and use the
wood screws
to attach them to the latch
mount, as shown below. The magnetic metal strips should be facing out of the
enclosure. Hand tighten only enough, so the magnetic latch doesn’t move, as the latch
will be later adjusted front-to-back to ensure the door is flush with the frame.
Each latch mount is attached via three screws. Use the 30mm cap head to secure the
latch mount inside the door frame. You’ll use 2 M4 12mm screws to attach the latch
mount to the right-side panel later in the assembly.
Attach the hinges to the
outside
door and door frame using M4 12mm screws and
nuts. There will be some play in the hole size so that you can adjust the door to swing
freely.
Attach the doorknob by first inserting the square M4 nut into the
Wood Screws
Magnetic Latch
Latch Mount
Copyright 2023 3D Upfitters LLC
8
