operation
n
Power On
- Press and release the function button,
the indicator light will illuminate blue for
approximately five seconds and then extinguish.
n
Power Off
- Press and hold the function button for
approximately three seconds until the blue indicator
flashes three times and then extinguishes.
n
If the 3D signal has not been detected, check that
there is nothing blocking the signal from the
projector to the eyewear.
n
3D Mode switch (optional)
- Some 3D projectors
allow the 3D image to be reversed or inverted.
While watching 3D images, press the function button
once. Press the function button again to return to
the previous state.
