CONFIDENTIAL & PROPRIETARY
DO NOT DISTRIBUTE
PAGE 2 OF 3
5246 SW 8
TH
ST, STE 204-A . Coral Gables, FL. 33134 || 786.701.0700 || www.3DChimera.com
3.
Loosen the hex screws on the x-axis carriage slightly (1/2 turn)
a.
NOTE: Do NOT loosen these screws fully, as there is a mechanism inside of the this
component that can be challenging to re-install
4.
Loosen the hex nuts on the side of the x-axis carriage to loosen the belt
