3DCPI-02
START-UP GUIDE
IV. Pre-print checks
Turn on the printer
Turn on the printer power switch. The LCD panel will show the firmware version. Then,
it displays an extruder temperature error. That´s because the machine makes
temperature test automatically and supposes there´s no temperature when turning on,
while in fact the extruder is at room temperature. Press the center key beside the LCD
panel to disarm the alarm. Now, plug the other end of the USB cable to your computer.
How to Load Filament
Power on and Stara loading filament.
1.
Navegate menú and select “Utilities”.
2.
Select “Filament Loading”. Select “Load”.