Pannoramic SCAN II 2.2.0 User’s Guide
5.6.2 Service
On this panel you can define which filters occupy which turret positions.
◦
The actually set filter position is marked at the
Current filter hardware position
field
◦
Select filter hardware positions from the
Filter hardware position:
drop-down list
Note:
The maximum number of virtual filters is 50 if you insert penta filters
(and this type is selected from the
Filter type
list) in the available 10
filter positions in the turret.
◦
Move filter wheel to insert position
◦
Enable position
Note:
Whenever a selected physical filter is disabled, the filter itself must be
removed from the turret.
◦
Select
Filter type
,
Filter channel
, and
Filter name
◦
Check
Available for scanning
◦
Set
Lumencor LED light source
, set
Excitation
and
Emission wavelength
/
bandwidth
values for the selected filter.
◦
Set
Pseudo-color
◦
Select channels used for grayscale conversion
◦
Select
Enable Lumencor hardware trigger
Click
Save
to save settings.
January 24, 2020 - Rev. 2
3DHISTECH Ltd.
125(156)
