background image

37

36

3DISON H700

 User Manual V.1

3DISON H700

 User Manual V.1

WiFi Camera

⑤ 

You can check an image in real time by clicking 

the added camara to ‘VsCam app’.

NOTE : 

●  

The wireless connection may generate a 

problem if the Internet router SSID (wireless 

network name) is inputted with special 

characters, Hangul and/or word spacing, 

so you must check the SSID when connecting.

●  

PIN may be changed after installation. 

●  

About two minutes of booting time is required after removal of LAN cable connected 

to the camera.  

●  

When the wireless SSID is not set with PIN, simply click OK button without inputting 

the PIN.

③ 

Enter 

Add Camera

 after execution of the pro-

gram to input UID number attached to a rear sur-
face of body, and input an initial PIN (personal iden-
tification number) 888888.  

② 

Install the 

IP Camera Super Client

 by executing 

the CD enclosed in the product. 

① 

Connect the Internet router to WIFI Camera via 

LAN cable. About one minute of booting time is
 required.  

2. Connecting to your computer

Annex2. Extra Features

            (Laser Engraver / WiFi Camera / Embedded Battery)

WiFi Camera

Embedded Battery

④ 

Connect the camera to the program by double 

clicking IP Camera on the right. Once you have 
checked the connection, Click a button at right of 
mouse to select 

[Camera Options].

 

  Embedded battery prevents emergent situation which is unexpected stopping supply of 
electricity during printing. Continuous printing without stopping is possible even if 
the power cord is pulled off by mistake or in case of sudden blackout.

⑤ 

Click 

[Set WIFI]>[Search Signals]

 on the option 

screen. Select currently used wireless 

SSID

 > click 

[Set]

 button > click 

[OK]

 button after inputting PIN. 

Once the message saying to disconnect LAN Cable 
appears, disconnect.

 

NOTE : 

●  

The wireless connection may generate a problem if the Internet router SSID (wireless net-

work name) is inputted with special characters, Hangul and/or word spacing, and therefore, 

it is imperative that SSID be checked when connecting.

●  

PIN may be changed after installation.

●  

About two minutes of booting time is required after removal of LAN cable connected to the 

camera.

●  

When the wireless SSID is not set with PIN, simply click OK button without inputting the PIN.

 

Output Power 

Maximum Run Time 

Battery Type

 

22.2 Vdc / 5200 mAh 

About 40 min.  

Lithium

Annex2. Extra Features

            (Laser Engraver / WiFi Camera / Embedded Battery)

Summary of Contents for H700






















Reviews: