5
4
3DISON H700
User Manual V.1
3DISON H700
User Manual V.1
B. Welcome to ∃DISON H700!
A. Safety Information
WARNING
The 3DISON H700 generates high temperatures and includes moving parts that
can cause injury. Never reach inside 3DISON H700 while it is in operation.
WARNING
There is a risk of shock. This product is not user serviceable.
WARNING
Do not leave the 3DISON H700 unattended during operation.
WARNING
Using the laser engraver requires instruction from the salesperson.
Thus, not instructed user is prohibited to use the function.
CAUTION
Wearing protective glasses is recommended before using the laser engraver.
CAUTION
When opening the 3DISON H700 for service, ensure that the power supply
is
turned off and the cord is disconnected from the wall socket.
CAUTION
Only use power supply provided with your 3DISON H700.
CAUTION
Do not print using materials that have not been approved by ROKIT.
CAUTION
The socket outlet must be located near the equipment and must be easily
accessible.
KC, CE, FCC certification -
3DISON H700 is certificated by KC, CE, and FCC which
indicates that 3DISON H700 meets the requirements of customer protection on
safety, health, and environment in Korea, European, and the U.S.
B1. About 3DISON H700
3DISON H700 is a desktop 3D printer based on the fused filament fabrication (
FFF
) meth-
od. 3DISON H700 is a world-class Desktop 3D printer boasting up to 25 micron(0.025 mm)
of superfine layer and speed of 1000mm/sec. 3DISON H700 features versatility when it
comes to
wider options of materials
such as metal paste as well as filament types just by
interchanging its extruder.
Besides, 3DISON H700 performs the function of cutting or carving with
the laser engrav-
er
. This printer also comes with
an internal WiFi Camera
enabling monitoring in different
locations and
embedded back-up battery
in case of power failures.
※
FFF method : This method works by laying down consecutive layers of material at high
temperatures allowing the adjacent layers to cool and bond together before the next layer
is deposited.
Printing
Specifications
Method of printing
Maximum Build Size
Printing Speed
Hot-end(nozzle) Size
Layer Resolution
Positioning Precision
Printing Material
Fused Filament Fabrication (FFF)
41.6 ℓ (290mmX205mmX700mm)
40mm/sec ~ 1000mm/sec
(* the speed of 1000mm/sec is possible in acceleration mode)
0.4mm, 0.6mm (an 0.2mm nozzle additionally provided)
25 ~ 600micron (100~300micron recommended)
X, Y : 11micron, Z : 2.5micron
- Spool Type:
PLA, ABS, Nylon, Flexible-plastic, HIPS, PVA, Heat-resistant PLA,
Wood, Stone, Engineering-plastic(Thermoplastic) etc.
- Paste Type:
Metal Paste(Silver, Bronze, Copper), Chocolate Paste etc.
(*Please visit our website as often as possible and meet newly added and improved
materials which are optimized to 3D desktop printer 3DISON.
http://en.3disonprinter.com/ )