ASSEMBLY INSTRUCTION FOR
RC MODEL PRINTED ON 3D PRINTER
Visit our website
and purchase a product which you are
www.print-beat.com
interested in. Then you get an access for the file download in g-code or STL format.
Download the files onto SD card. We try to optimize the universal G-code output
for the widest selection of printers and we test our products on several printer
brands and configurations. In case you are owner of the Prusa 3D printer use for
the print the files prusa G-code
- minimum supported size of the printed surface is 20x20x15 cm
Print all of the model parts on the 3D Printer
- the supported type of filament is PLA
- for bonding of the model parts we recommend to use Super Glue (medium thick)
and Activator.
Assemble the model according to the attached PDF manual
Read and understand the entire manual carefully before bonding
PRODUCT CONTAINS
STL files of RC model Macchi MC.200 in 1/8 scale for 3D printer PRUSA.
Universal G-code of RC model Macchi MC.200 in 1/8 scale optimized for 3D printers
SimpliFy3D factory files of RC model Macchi MC.200 in 1/8 scale
Asssembly instructions in PDF format
Scale markings in PDF format
Length
100 cm / 39,4 inch
Wingspan
133,5 cm / 52,2 inch
Weight of all printed parts
1650 g
Takeoff weight
2150 g / (4s 2800mAh Li-Po, 6x servo, SC)
MODEL SPECIFICATION
member of Group
1
