Installation
3Dlabs Graphics Accelerator Card User's Manual
3
Installing your 3Dlabs Graphics Accelerator Card
1.
Determine whether your 3Dlabs Graphics Accelerator Card is designed to fit
into either an AGP/AGP Pro slot or a PCI slot in your computer.
Note: If your card is configured with a factory installed daughter card
attached, then the base (or larger) card is an AGP and/or AGP Pro compatible
card. If the daughter card includes a card edge connector, the daughter card
is a PCI compatible card and must be inserted in the adjacent PCI slot. If the
daughter card does not have a card edge connector, it still takes up the space
of a second slot, but is not inserted into that slot.
See the drawings below showing these different types of card edge connectors to
determine which type of card you have.
2.
If your 3Dlabs Graphics Accelerator Card includes a daughter card you must
install your base card into the AGP/AGP Pro slot and the adjacent PCI slot
must be empty to accomodate the daughter card. Check your system
documentation to locate the appropriate slot(s).
3.
Turn off and unplug the power source for your system and each of its
peripherals.
Note: If you are replacing an old graphics card, be sure to uninstall your old
video driver software before tuning off your system and removing your old
graphics card.
PCI-Card
AGP/AGP Pro-Card
Summary of Contents for Oxygen GVX1 Pro
