Installation
3Dlabs Oxygen GVX420 User's Guide
4
3.
Locate the AGP or AGP Pro slot and remove its slot cover. The PCI slot adjacent to the AGP or
AGP Pro slot must be empty to make room for the daughter card.
4.
Remove the slot cover from the PCI slot adjacent to the AGP or AGP Pro slot.
5.
Attach the anti-static strap to your wrist, and attach the other end to a bare, conductive (as opposed
to painted or sticker-covered) area of your system’s chassis.
6.
Remove the card from its anti-static packaging. Write down the serial number for registration and
future use.
7.
Align the connector on the Oxygen GVX420 card over the AGP or AGP Pro slot and the connector
on the daughter card over the adjacent PCI slot before attempting to seat the cards.
Important!
See your system documentation for instructions on securing the card to the chassis.
Loose cards and connections can cause grounding and operating problems.
8.
Remove the anti-static strap and replace the cover on your system.
Installing Oxygen
GVX420 with
DVI daugher card