2
GETTING STARTED
Figure 2.43: 91% alcohol for cleaning print surface
2. Download a G-code file, for example “CuteOcto PLA.gcode”, from our website, and
save it to your computer’s Desktop or a location of your choice.
3. On the Repetier-Host interface, click the “Load” button on the top menu bar (Figure
2.44). Locate the downloaded file “CuteOcto PLA.gcode” and open it.
Figure 2.44: Loading file from the Repetier-Host interface
4. The Repetier-Host interface with the loaded file is shown in Figure 2.45.
http: // 3dmakerworld. com
43
