6
PRINTING WITH DUAL EXTRUDERS
•
Download the Artifex 2 Duo Calibration G-code from our website, and load the code
into Repetier-Host as shown in Figure 6.9, where the green lines to be printed by
Extruder 1 and the blue lines by Extruder 2.
Figure 6.9: Loading Artifex 2 Duo nozzle offsets calibration model
•
After printing out the model, check the location where the green and blue lines align
to each other. Each marker line represents an additional 0.1mm offset. Figure 6.10
shows the additional offsets for Extruder 2 are:
X
= 0
.
7
mm
, and
Y
=
−
0
.
3
mm
.
http: // 3dmakerworld. com
72
