20
4.2.2
Lancement du décollage
Maintenez à nouveau Fly enfoncé pour lancer le décollage. Le Solo atteindra 3 mètres (10 pieds) et planera
jusqu’à réception d’une nouvelle commande.
Figure 4.2.2.1: Manette - Messages de décollage
4.3 Atterrissage
Maintenez Fly enfoncé pour faire atterrir le Solo à l’endroit où il se trouve actuellement.
Figure 4.3.2.1: Manette - Atterrissage commandé par l’utilisateur
Après l’atterrissage, les hélices cesseront de tourner automatiquement ; attendez que les hélices cessent de tourner
avant de vous approcher du Solo. Si les hélices ne s’arrêtent pas, appuyez sur le bouton Pause de la manette ou
utilisez l’option d’arrêt de secours décrit dans la section 3.9.5.
Lorsqu’il reçoit l’ordre d’atterrir, le Solo atterrit à l’endroit actuel, où
qu’il se trouve. Vérifiez toujours que la trajectoire de vol vers le point
d’atterrissage directement sous le Solo est exempte d’obstacle avant
l’atterrissage.
N’approchez jamais du Solo quand les hélices tournent. Après un
atterrissage ou retour à la base automatique, attendez toujours que les
hélices s’arrêtent avant d’approcher ou de toucher le Solo.
TAKEOFF PART 2
Auto-takeoff
User holds “Fly” to initiate auto-takeoff.
“Fly” button LED blinks on Artoo when motors
are on. LED becomes solid white when takeoff
begins.
Telemetry
Back on telemetry screen after auto-takeoff.
Auto-takeoff message
During auto-takeoff, target altitude message is
displayed.
Message times out after 3000 milliseconds.
Auto-takeoff
User holds “Fly” to initiate auto-takeoff.
“Fly” button LED blinks on Artoo when motors
are on. LED becomes solid white when takeoff
begins.
Haptic: press and hold feedback is given.
Auto-takeoff
Green bar returns to zero progress position
on transition.
User holds “Fly” to initiate auto-takeoff.
“Fly” button LED blinks on Artoo when motors
are on. LED becomes solid white when takeoff
begins.
Cable Cam
Orbit
FLY
12
FLY
Hold
to take off
Cable Cam
Orbit
FLY
12
Cable Cam
Orbit
FLY
12
Cable Cam
Orbit
9999
FT
700
FT
HOME
100
%
FLIGHT BATTERY
ALTITUDE
FLY
12
GOING TO 5 FT ALTITUDE
Cable Cam
Orbit
9999
FT
700
FT
HOME
100
%
FLIGHT BATTERY
ALTITUDE
FLY
12
FLY
Hold
to take off
FLY
Hold
to take off
TAKEOFF PART 2
Auto-takeoff
User holds “Fly” to initiate auto-takeoff.
“Fly” button LED blinks on Artoo when motors
are on. LED becomes solid white when takeoff
begins.
Telemetry
Back on telemetry screen after auto-takeoff.
Auto-takeoff message
During auto-takeoff, target altitude message is
displayed.
Message times out after 3000 milliseconds.
Auto-takeoff
User holds “Fly” to initiate auto-takeoff.
“Fly” button LED blinks on Artoo when motors
are on. LED becomes solid white when takeoff
begins.
Haptic: press and hold feedback is given.
Auto-takeoff
Green bar returns to zero progress position
on transition.
User holds “Fly” to initiate auto-takeoff.
“Fly” button LED blinks on Artoo when motors
are on. LED becomes solid white when takeoff
begins.
Cable Cam
Orbit
FLY
12
FLY
Hold
to take off
Cable Cam
Orbit
FLY
12
Cable Cam
Orbit
FLY
12
Cable Cam
Orbit
9999
FT
700
FT
HOME
100
%
FLIGHT BATTERY
ALTITUDE
FLY
12
GOING TO 5 FT ALTITUDE
Cable Cam
Orbit
9999
FT
700
FT
HOME
100
%
FLIGHT BATTERY
ALTITUDE
FLY
12
FLY
Hold
to take off
FLY
Hold
to take off
AUTO-LAND
Auto-land
User holds “Fly” to initiate auto-land.
Haptic: press and hold feedback is given.
Auto-landing message
During auto-land, landing status is messaged.
Messgae stays on screen until copter has
landed.
Spot lock
Rewind
555656
Auto-landing complete
Auto-land complete screen shown when
copter has touched down.
(In case user is not able to see copter.)
Message times out after 5000 milliseconds.
Auto-land prompt
If user presses “Fly” in flight, the auto-land
prompt appears.
User holds “Fly” to initiate auto-land.
Spot lock
Rewind
Telemetry
Back on telemetry screen after auto-landing,
prior to auto or user initiated disarming.
FLY
12
FLY
12
Cable Cam
Orbit
5
FT
0
FT
HOME
30
%
FLIGHT BATTERY
ALTITUDE
FLY
12
Cable Cam
Orbit
9999
FT
700
FT
HOME
100
%
FLIGHT BATTERY
ALTITUDE
LAND
12
LANDING IN PROGRESS
Cable Cam
Orbit
5
FT
0
FT
HOME
30
%
FLIGHT BATTERY
ALTITUDE
LAND
12
LANDING COMPLETE
FLY
Hold
to land
FLY
Hold
to land
AUTO-LAND
Auto-land
User holds “Fly” to initiate auto-land.
Haptic: press and hold feedback is given.
Auto-landing message
During auto-land, landing status is messaged.
Messgae stays on screen until copter has
landed.
Spot lock
Rewind
555656
Auto-landing complete
Auto-land complete screen shown when
copter has touched down.
(In case user is not able to see copter.)
Message times out after 5000 milliseconds.
Auto-land prompt
If user presses “Fly” in flight, the auto-land
prompt appears.
User holds “Fly” to initiate auto-land.
Spot lock
Rewind
Telemetry
Back on telemetry screen after auto-landing,
prior to auto or user initiated disarming.
FLY
12
FLY
12
Cable Cam
Orbit
5
FT
0
FT
HOME
30
%
FLIGHT BATTERY
ALTITUDE
FLY
12
Cable Cam
Orbit
9999
FT
700
FT
HOME
100
%
FLIGHT BATTERY
ALTITUDE
LAND
12
LANDING IN PROGRESS
Cable Cam
Orbit
5
FT
0
FT
HOME
30
%
FLIGHT BATTERY
ALTITUDE
LAND
12
LANDING COMPLETE
FLY
Hold
to land
FLY
Hold
to land
Soyez conscient de l’orientation du Solo avant le décollage pour pouvoir
diriger le Solo en toute sécurité une fois qu’il est en l’air. Quand le Solo vous
fait face lors du décollage, tirez le joystick droit vers vous ; si vous vous
trouvez derrière le Solo, poussez le joystick droit vers l’avant.
Les hélices en rotation peuvent causer des dommages
importants !
Vérifiez toujours que le Solo ne rencontre aucune
obstruction et qu’aucune personne ni aucun animal ne se trouvent
à proximité du Solo avant de faire tourner les hélices.
400 ft
400 ft
Summary of Contents for Solo
Page 1: ...Manuel d utilisateur...
Page 57: ......
