34
Figure 6.2.2.1: Manette - Alertes de connexion d’application
6.2.3
Alertes de signal de la manette
Lorsque le Solo vole derrière des objets solides, comme des bâtiments et des arbres, les signaux de communication
sont bloqués entre le Solo et la manette. Maintenez toujours un contact visuel avec le Solo pour vous assurer
que le signal ne rencontre aucun obstacle. Les antennes-relais et les signaux Wi-Fi voisins peuvent causer des
interférences avec le système de communication et diminuer sa portée. Évitez de voler dans des secteurs à forte
densité de population pour éviter les sources d’interférence.
Quand la manette n’est plus jumelée au Solo pendant le vol, elle affiche l’alerte suivante et le Solo retourne à la
base. Voir la section 9.3 pour des instructions sur le jumelage.
Figure 6.2.3.1: Manette - Alerte de contrôleur déconnecté
Quand le signal entre le Solo et la manette est perdu pendant le vol, la manette affiche l’alerte de signal de manette
perdue et le Solo retourne à la base. Quand le signal est récupéré lors du retour à la base, la manette affiche l’alerte
de signal récupéré et offre l’option de reprendre le contrôle manuel en appuyant sur le bouton Fly.
Figure 6.2.3.2: Manette - Alertes de signal de la manette
6.2.4
Alertes de signal GPS
Quand le signal GPS est perdu pendant le vol, Solo passera en mode Fly: Manual (manuel). En cas de perte du
signal GPS, nous recommandons de faire atterrir le Solo et d’attendre d’acquérir la localisation GPS avant de
redécoller.
Dans la Fly:Manual (manuel), le Solo utilise les mêmes commandes de joystick qu’avec le vol standard (affiché en
tant que « Fly »), mais n’inclut aucun positionnement GPS. Par conséquent, en mode Fly:Manual (manuel), le Solo ne
maintiendra pas sa position quand le joystick droit est relâché et vous devrez maintenir un contrôle strict du roulis,
du tangage et du lacet. Sans GPS, les options Pause, Return Home, and Smart Shots ne sont pas disponibles.
Pendant l’atterrissage, le Solo ne pourra pas maintenir sa position en raison de l’absence de positionnement GPS
et dérivera en fonction du vent et d’autres conditions environnementales. Quand une autre alerte se produit tandis
que Solo est en mode Fly:Manual (manuel), le Solo ne pourra pas retourner à la base et lancera un atterrissage non
positionné à l’endroit actuel.
IN-FLIGHT BANNER ALERTS
Solo app connected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in “sensor error” screen)
Solo app disconnected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in “sensor error” screen)
Landing Complete
Screen showing automatic landing is complete
Alert persists until:
TIMEOUT: 3000 milliseconds
Controller connection poor (Banner)
Appears once connection strength is below average performance
for X time.
TIMEOUT: After 3000 milliseconds
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
3DR Solo app connected
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
3DR Solo app disconnected
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
Landing complete
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
Disconnected
12
Disconnected from Solo
IN-FLIGHT BANNER ALERTS
Solo app connected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in “sensor error” screen)
Solo app disconnected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in “sensor error” screen)
Landing Complete
Screen showing automatic landing is complete
Alert persists until:
TIMEOUT: 3000 milliseconds
Controller connection poor (Banner)
Appears once connection strength is below average performance
for X time.
TIMEOUT: After 3000 milliseconds
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
3DR Solo app connected
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
3DR Solo app disconnected
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
Landing complete
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
Disconnected
12
Disconnected from Solo
IN-FLIGHT BANNER ALERTS
Solo app connected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in “sensor error” screen)
Solo app disconnected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in “sensor error” screen)
Landing Complete
Screen showing automatic landing is complete
Alert persists until:
TIMEOUT: 3000 milliseconds
Controller connection poor (Banner)
Appears once connection strength is below average performance
for X time.
TIMEOUT: After 3000 milliseconds
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
3DR Solo app connected
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
3DR Solo app disconnected
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
Landing complete
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
Disconnected
12
Disconnected from Solo
IN-FLIGHT ALERTS: CONTROLLER RELATED
RC Failsafe
Controller signal lost, RTH screen
Alert persists until:
TIMEOUT: 5000 milliseconds
Controller
signal lost
Solo will return home
RC Signal Recovered
User can press Fly to recover
Alert persists until:
User presses Fly and enters Fly mode
HAPTIC: 40millisecond so user is aware that they can take control
RC Failsafe (No GPS)
Controller signal lost,
emergency land screen
Alert persists until:
TIMEOUT: 5000 milliseconds
Controller Value out of Range
User is asked to contact customer support
Alert persists until:
TIMEOUT: 5000 milliseconds
go to persistent hint-box message
(persistent until reboot)
Control stick
error
Solo will return home
Signal
recovered
Controller
signal lost
Emergency landing started
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
Return Home
12
Control stick error
Contact 3DR Support after landing
Camera paddle and dial failure
Alert triggered on input error on the paddle
or tilt speed dial potentiometers
TIMEOUT: 5000 milliseconds
Control stick
error
Solo will return home
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
Manual camera controls error
IN-FLIGHT ALERTS: CONTROLLER RELATED
RC Failsafe
Controller signal lost, RTH screen
Alert persists until:
TIMEOUT: 5000 milliseconds
Controller
signal lost
Solo will return home
RC Signal Recovered
User can press Fly to recover
Alert persists until:
User presses Fly and enters Fly mode
HAPTIC: 40millisecond so user is aware that they can take control
RC Failsafe (No GPS)
Controller signal lost,
emergency land screen
Alert persists until:
TIMEOUT: 5000 milliseconds
Controller Value out of Range
User is asked to contact customer support
Alert persists until:
TIMEOUT: 5000 milliseconds
go to persistent hint-box message
(persistent until reboot)
Control stick
error
Solo will return home
Signal
recovered
Controller
signal lost
Emergency landing started
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
Return Home
12
Control stick error
Contact 3DR Support after landing
Camera paddle and dial failure
Alert triggered on input error on the paddle
or tilt speed dial potentiometers
TIMEOUT: 5000 milliseconds
Control stick
error
Solo will return home
324
FT
84
FT
HOME
48
%
FLIGHT BATTERY
ALTITUDE
FLY
12
Manual camera controls error
Summary of Contents for Solo
Page 1: ...Manuel d utilisateur...
Page 57: ......
