8. Sealing Gaps
Once the enclosure is completely put together, it's time to make sure that each panel is held
tightly to each adjoining panel. The connectors are designed with a small amount of play that
allows you to make minor adjustments for the perfect fit.
1. Loosen screws on the panel to move.
2. Push that panel into place. You may need a friend to hold it there.
3. Re-tighten the screws to hold the panel.
Repeat the product, going around the enclosure, looking to make sure all panels are flush with each
other.
20. Managing Enclosure Temperatures
There's not much to a 3D printer enclosure. Although ours look fancy, they're not much
di
ff
erent from putting a card box over the printers since both designs are passively heated by
the heated beds.
We generally get two types of customers:
1. Those interested primarily in air quality.
2. Those interested primarily in print quality.
Copyright 2020 3DUpfitters
14