3e-525A Outdoor Access Point
24
29000132-001 A
29000132-001 A
25
Dynamic key management requires the installation of the 3e-030
Security Server software which resides on a self-contained workstation
connected to the 3e-525A over the WAN port. The Security Server soft-
ware configuration includes: obtaining a root certificate from a Certificate
Authority (CA) like Microsoft; obtaining user certificates based on the CA
which will be used by the clients; and configuring the 3e Technologies
International's Security Server software with the appropriate root certifi-
cate. The Security Server software application is discussed in a separate
manual.
If you have installed the Security Server software, Dynamic Key
Management is the preferred security setup. Get the IP Address and
password of the Security Server and the Key type. Key type will be either
3DES (192-bit), or AES (128-bit, 192-bit or 256-bit). Thereafter, the Security
Server handles authentication dynamically.
Once you have selected the options you will use, click
Apply
.
If you have the 3e-525A configured in non-FIPS mode, the security
screens will look a bit different.
No Encryption (non-FIPS)
In order to the 3e-525A with no encryption, you must actively select
None
and click
Apply
. A screen will appear, asking if you really want to
operate in Bypass mode. If you answer
Yes
, no encryption will be applied.
Summary of Contents for 3e-525A
