3e–525C–3 Wireless Access Point
Chapter 3: Access Point Configuration
30
29000171-001 A
3e–525C–3 Wireless Access Point
Chapter 3: Access Point Configuration
29000171-001 A
31
Wireless Access Point Configuration
General
Wireless Setup allows your computer’s PC Card to communicate with
the access point. Once you have completed wireless access point configu-
ration, you can complete the rest of the configuration wirelessly, assum-
ing that you have installed and configured a wireless PC card on your
computer. (If you have not done so, you will have to do that to establish
communications. Follow the manufacturer's instructions to set up the PC
Card on each wireless device that will be part of the WLAN.)
The
Wireless Access Point — General
screen lists the MAC Address
of the AP card. This is not the MAC Address that will be used for the BS-
SID for bridging setup, however. That is found on the
Wireless Bridge
— General
screen.
If you will be using an
SSID
for a wireless LAN, enter it here and in
the setup of each wireless client. This nomenclature has to be set on the
access point and each wireless device in order for them to communicate.
