3idee HP-HP24F Instruction Manual Download

Page: 3 / 3

Feel free to send your questions to:

info@3idee.eu

Feel free to give us a call:

+352 661 878 191

You still have
questions?

Mail

Safety instructions

General Notes:

Material Notes:

– Make sure all screws are tight and the
monitor audibly clicks into place during
installation.

– The material of the adapter is not heat
resistant. Avoid direct heat in the vicinity of
the adapter, such as PC exhaust air or direct
sunlight.

The adapter is made of high quality
polylactide (PLA) plastic. PLA is both a
colorfast and UV-resistant material and

has low flammability. Polylactide has a low

temperature resistance of about 45°C-55°C
and is therefore not suitable for use around
direct heat and heat sources.

– Avoid jerky movements (pulling, tearing)
on the PC monitor. This can impair the
performance of the VESA adapter.

– Do not subject the PC monitor to
excessive loads such as leaning or pushing.

This may affect the performance of the

VESA adapter.

We wish you a lot of fun with your product.

Your 3idee Team

3idee SARL

19, Rue de Bitbourg

LU-1273 Luxembourg

Instruction manual

Summary of Contents for HP-HP24F

Page 1: ...The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern 75 x 75mm Use the included screws and nuts for this purpose If you want to mount your VESA adapter directly to the wall use suitable screws and dowels for this purpose not included in the scope of delivery HP HP24F ...

Page 2: ...ur monitor Step 2 Mount the adapter on the VESA connector of your monitor arm or on the wall Figure 1 Step 3 Plug the monitor onto the adapter so that it audibly clicks into place Note Apply a little pressure if necessary Figure 1 2 Instruction manual ...