Ver 1.0.0.0
3
Software Connection Settings
Before the setup, please confirm that the LAN port of the router has been connected with the
PC via RJ-45. Refer to the following sections to set up the G2wifi II based on the modem you
have selected:
y
Set up the G2wifi II for ADSL / Cable Modem
1. Connect the WAN port on the G2wifi II to your DSL modem, cable modem or to your
Ethernet Hub if you have the fixed IP.
2. Determine your provider’s IP scheme: fixed IP, DHCP or PPPoE. (Please ask your
Internet Service Provider for the connection details and information.)
3. Type
http://192.168.8.1
into IE browser to enter the setup for G2wifi II.
4. Please
choose
“Admin”
as the user name and leave the password blank for the
router.
5. PPPoE
Æ
Set up the PPPoE account (User Name and Password) on the G2wifi II.
6. If your WAN port is using a fixed IP
Æ
Set up the fixed IP on the G2wifi II.
7. For cable modem users (DHCP), please leave the Internet setup as default.
y
Setup the G2wifi II for Dial-up Modem Setting
1. Please connect your computer to G2wifi II’s LAN port.
2. Initiate your Internet Explorer, and type in the address “192.168.8.1”
3. Please
choose
“Admin”
as the user name and leave the password blank. Click
Log
In
button to enter router’s setup page.
