![background image](http://html1.mh-extra.com/html/3m/101-series/101-series_operation-manual_444004022.webp)
Scan through device menu until “SERVICE ?” is displayed.
Press START on keypad to initiate process to enter SERVICE submenu.
Enter service ACCESS CODE value for entering service submenu level.
Once accessed to device service submenu level will first display “* SERVICE *”.
Use arrow keys to scan through submenu to locate BLUETOOTH function.
Press START keypad to display the device printer Bluetooth status.
One of the following displays will appear:
A six value alphanumeric code that indicates the device has been previously set up a wireless link with a
printer. Press the “STOP” key to avoid changing code.
Six underscore markings (without alphanumeric values) displays indicate device has not been prior set up
with a printer.
Press either arrow keypad to initiate creating a printer Bluetooth wireless connection.
Press START keypad to initiate process for device to seek and create a Bluetooth link with a printer. This
may take about a minute.
Device will display “SEEKING PRINTER…”, searching a printer Bluetooth wireless link.
When device successfully links with printer, an alphanumeric code will be displayed.
Note, if device is not able to link with printer, the “PRINTER NOT READY” will temporarily displayed.
Press UP arrow key to return to start of BLUETOOTH? Menu.
To quit Bluetooth link process, press “STOP” keypad to back out of service menu or press & hold “STOP”
keypad to turn off device
Press START keypad to restart device, then proceed back to the BLUETOOTH function in SERVICE menu as
previously noted.
Press the START keypad will display printer Bluetooth code.
SERVICE ?
PROCEED >
ACCESS CODE ?
##
START
* SERVICE *
PROCEED >
BLUETOOTH ?
PROCEED >
START
PRINTER ##-##-##-
##-##-##>
PRINTER
_ _ _ _ _ _ >
START
CREATE NEW
CONNECTION ?
SEEKING PRINTER...
>
PRINTER ##-##-##-
##-##-##>
-21-
STOP
START