13
8.05 Cut corner of 4445 Sealant bag. Starting at opposite end, force
sealant out and fill area between foam collars.
Note:
Carefully follow health, safety and disposal instructions as
given on Material Safety Data Sheet or product label for
4445 Sealant.
Note:
Protective gloves should be worn during sealant
dispensing and overwrapping steps.
8.06 Overwrap with at least two additional half-lapped layers of E-Z
wrap.
8.07 Secure E-Z wrap by compressing foam collar ends with three half-
lapped layers of highly stretched 3/4" (19 mm) vinyl tape.
8.08 Evenly work the 4445 Sealant between buffer tube(s) and strength
members.
8.09 Overwrap entire block with one half-lapped layer of highly
stretched 3/4" (19 mm) vinyl tape.
8.10 Apply a compression wrap with two half-lapped layers of highly
stretched 3/4" (19 mm) DR tape.