16
8.24 Overwrap entire block with one half-lapped layer of highly
stretched 3/4" (19 mm) vinyl tape.
8.25 Apply a compression wrap with two half-lapped layers of highly
stretched 3/4" (19 mm) DR tape.
8.26 Overwrap with one additional half-lapped layer of vinyl tape.
8.27 Follow steps 8.15 thru 8.26 until all cables are blocked.
8.28 Secure the cables to the splice case per the splice case practice.
9.0 Sealing Washer Installation
9.01 Wrap each cable with two wraps of 2" wide DR Tape. Place wraps
behind foam tape collar from core block.
9.02 Place the first sealing washer against the DR Tape. Build cable
entrance seals by wrapping 1 1/2" (38 mm) sealing tape between
washers. Wrap each cable until sealing tape O.D. is flush with the
washer O.D. Slide second washer against sealing tape.